Boston University Sports Psychology Graduate Program on this page. Pcut ct 630 The Creation pcut ct 630 and Creation pcut cto 630 are good vinyl plotters for the price but it isn’t the easiest thing to setup. First thing it has usb port but I have never had any luck with it, a quick search on Google shows that most people use the serial port anyway. The program I’ve had most success with is Sign Blazer, it isn’t the best looking software but it does the job. In the guide i will be setting up a Creation pcut ct 630 but the same steps work with the pcut cto 630, the pcut cto 630 is a newer version of the pcut ct 630 To setup the Creation pcut ct 630 using the serial connection you first need to make sure your serial port is working on your PC or laptop. If you right click on my computer and then click on manage this will bring up the Computer Management Window in the left column you will need to click on device manager. Which should look something like this?
A: If you are using Artcut2009 change the X to Y. If you are using Signblazer just check the mirror box If you are using Flexi 7 just download the update for Flexi. A: If you are using Artcut2009 change the X to Y. If you are using Signblazer just check the mirror box If you are using Flexi 7 just download the update for Flexi.
From here you need to click on “Ports (COM & LPT)”, this will should you all your serial (COM) and parallel (LPT) ports. Sign Blazer only sees the first few serial ports so if the one you want to use is over 5 you will have to right click and go to properties the go to the advanced port settings and change it to something lower. Now open Sign Blazer and go to the cutter preferences, the Cutter should be “Creation pcut ct 630”.
Counter Strike Source Mp-sp Patch V_1.0.0.76. Change the Output Device to the serial (COM) port you’re using; it should look something like this: Next you will need to click on “comm settings” you shouldn’t have to change anything but just make sure they are the same as the following: In the manual that comes with the PCut CT 630 it says you should set the Baud rate to 19200 but I couldn’t get it working at that speed. Now that is all setup you will need to make sure the vinyl plotter is setup. Once your vinyl plotter is turned on you will need to press the “on-line” button then the mode button 7 times to get the Baud setting, if you haven’t guessed this needs to be 9600. To change the baud rate is a bit strange to change it to a lower speed press the + and for a faster speed press. After all that is done remember to press the mode button to get back to the screen for setting the X and Y axis, then press the “on-line” button and make sure the screen says on-line. The plotter won’t cut unless the screen says on-line. With all that done you should be ready to use your plotter.
Alphazawgyi 64bit Software. If you have any questions about setting up creation pcut ct 630 or pcut cto 630 feel free to ask in the comments. I personally have never got mine to work with the USB driver, but when you install the USB driver the command prompt will open do what it needs to do and closes so your driver is installed. The USB driver is not like a normal printer driver, the PCUT CTO630 has an internal USB to serial convertor. So if check out the device manager on your PC and look in the Ports (COM & LPT) you will have a new COM (serial) port, once you have the COM port number you will be able to set up your vinyl plotter with the help of my set up guide You can have a try getting it working. But my advice is to use the serial connection and not USB Redemption.Man •. Hi, i’m at my wits end with with cutter, its the cto 630, it has never been reliable in the 3 months I have had it. At present the cutter is messing all the letters up, cutting over previous and mishaping the letters/numbers.