Whether someone mistakenly backed into your car in a grocery store parking lot or that concrete pole was just a little closer than anticipated, your car’s is likely to have taken a bruising or two over the course of regular usage. The amount of impact absorbed by the bumper will determine whether the bumper is repairable or not. Some bumpers will cave-in while others will crack.
I have been asked many times how to repair a plastic bumper cover. So I made this short article and kept it simple without all the fancy long plastic names that. Download Goldmine Standard 6.7 Software. Plastic auto bumpers seem to nearly always develop small cracks, even if they have not been involved in an accident. You've thought of replacing the whole bumper. Got a bumper scuff or scratch? While not as severe as a bumper crack or dent, a trip to an. To repair a plastic bumper, mix the contents in compliance with the instructions provided with the repair kit. Step 15: Tape the cracked surfaces together. On the front side of the repair area, use the tape to pull the opposing edges of cracked surfaces together.
Luckily, those two types of bumper bruises are repairable in almost all cases, unless the damage is extreme. If the bumper is subject to lots of cracks or if it is missing a lot of its material, it may be better to replace the bumper itself. Autoit Serial Port Example there. Often, you will have to consult with a local auto body shop to determine the degree of damage, and most body shops will provide a free repair estimate.
But before allowing the body shop to actually repair your vehicle for you, there are a few easy ways to fix a damaged bumper yourself using a few items that you may already have around the house. Part 1 of 2: Repair a caved-in bumper Materials Needed • Heat gun or hair dryer (generally a hair dryer is safer for this procedure but it may not always do the job) • • • • Safety glasses • Work gloves Step 1: Raise the vehicle and support it securely with jack stands.
To secure the jack stands, make sure the jack stands are on a solid surface and use a jack to lower the pinch weld or inner frame of the vehicle to rest on the jack stand. You can find more information on securing the jack stands Step 2: Remove the splash guard. If applicable, remove the splash guard underneath the vehicle or fender well guard to access the rear affected area of the bumper. The splash guard will be held on by plastic clips or metal bolts.